Machine-Tool components · Products · MEKIFASA

Column

Part with boring operations, guide polishing and geometrical tolerances less than 0.02 mm · Starting material: boilerwork · Dimensions: 500 x 500 x 1,500 mm · Weight: 500 kg.

Piston

Part with lathe operations with tolerances less than 0.02 mm · Starting material: pre-treated steel · Dimensions: Ø065 x 45 mm · Weight: 0.5 kg.

Ram milling machine

Part with lathe and boring operations with dimensional and geometrical tolerances of guides and axis of the piece · Starting material: foundry · Dimensions: 600 x 600 x 3,000 mm · Weight: 2,000 kg.

5-position tool holder

Part with lathe, milling, and grinding operations, with dimensional and geometrical tolerances and position of holes of less than 0.02 mm · Starting material: carbon steel · Dimensions: Ø300 x 100 mm · Weight: 50 kg.

Short axle transmission

Part lathe, milling and grinding operations. For grinding teeth with geometrical tolerances on teeth relative to cotters and axle. Starting material: pre-treated steel. Dimensions: Ø170 x 300 mm. Weight: 40 kg.

Tool holder

Part with lathe operations with dimensional and geometrical dimensions in the holes between each other relative to the base. Starting material: carbon steel. Dimensions: 200 x 200 x 250 mm. Weight: 40 kg.

Main turret lathe

Part with milling, boring and lathe operations. Geometrical and dimensional tolerances within 0.02 mm. Starting material: carbon steel. Dimensions: 400 x 400 x 170 mm. Weight: 150 kg.

Carriage

Part with milling and boring operations. Geometrical and dimensional tolerances within + 0.02 mm. Starting material: carbon steel. Dimensions: 500 x 500 x 250 mm. Weight: 300 kg.

Forming sleeve

Part with lathe and drilling operations. Geometrical and dimensional tolerances within 0.02 mm. Part tempered by induction. Starting material: treated Steel. Dimensions: Ø500 x 1200 mm. Weight: 600 kg.

Tool turrets

Tool holders

Turret body

Cross slide

Longitudinal slide

Pivot base

Milling machine console

Part with boring and milling operations with tolerances less than 0.02 mm · Starting material: Foundry · Dimensions: 2500 x 1200 x 400 mm · Weight: 1,600 kg

Machine frame

Part with milling and boring operations with tolerances less than 0.02 mm · Starting material: Boilerwork · Dimensions: 2500 x 1500 x 500 mm · Weight: 500 kg

Milling machine column

Part with boring operations with tolerances less than 0.01 mm · Starting material: Foundry · Dimensions: 2800 x 1500 x 1800 mm · Weight: 5,000 kg

Milling machine table

Part with milling and boring operations with tolerances less than 0.01 mm · Starting material: Foundry · Dimensions: 3000 x 1600 x 250 mm · Weight: 4,000 kg